VMware VS4-ENT-PL-A - vSphere Enterprise Plus Page 118 Setup Manual Download

Page: 118 / 276

VMware vCenter Management Webservices Service Fails to Start

When you reboot the vCenter Server machine after installing vCenter Server, the VMware VirtualCenter

Management Webservices service does not start.

Problem

The VMware VirtualCenter Management Webservices service does not start automatically.

Cause

This problem can occur when vCenter Server and the database are installed on the same machine.

Solution

Start the service manually.
Select Settings > Control Panel > Administrative Tools > Services > VMware VirtualCenter

Management Webservices and start the service. The machine might require several minutes to start the

service.

Back Up the Inventory Service Database on Windows

You should back up the Inventory Service database as part of your regular vCenter Server database

administration.
To move the Inventory Service database to a different host machine, back up the database on the source

machine and restore the database on the destination machine. Your vCenter Server database administration

should also include regular backups of your vCenter Server database. See the vendor documentation for

your vCenter server database type.

Prerequisites

Consult your database administrator about backing up and restoring databases.

Verify that you have system administrator privileges to perform backup or restore operations.

Procedure

On the source machine, stop the Inventory Service.
a

From the Windows Administrative Tools control panel, select Services.

Right-click VMware vCenter Inventory Service and select Stop.
The Status changes from Started to blank.

On the source machine, open the command prompt in the vCenter Server and change the directory to

vCenter_Server_installation_directory\Infrastructure\Inventory Service\scripts

Run the following command at the prompt to back up the Inventory Service database.

backup.bat -file backup_file_name

When the backup operation finishes, the message

Backup completed successfully

appears.

Restore an Inventory Service Database Backup on Windows

You can restore a backup of your Inventory Service database for disaster recovery, after a vCenter Server

upgrade, or to move the database to a new machine.
The machine that you back up the database from is the source machine. The machine that you restore the

database to is the destination machine.

vSphere Installation and Setup

118

VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Search results

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus

Reviews:

Related manuals for VS4-ENT-PL-A - vSphere Enterprise Plus

Brands by name

Popular brands

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

Search results

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus

Reviews:

Related manuals for VS4-ENT-PL-A - vSphere Enterprise Plus

Brands by name

Popular brands