Scanning service information
77
Scanning operating status information
1.
Press
.
2.
Select the required operating status
data for scanning with the
or
button.
3.
Press
.
Operating status scanning mode
is activated.
Exit the operating status scanning
mode.
The following operating status
information can be scanned depending
on the system equipment installed:
Participant number
Holiday program
with date of departure and return
Holiday program active
Outdoor temperature
Boiler temperature
Flue gas temperature
Sensor 17A
Sensor 17B
DHW temperature
DHW temperature 1
DHW temperature 2
Supply temperature
Burner hours run
– 1st stage burner
– 2nd stage burner
Number of burner starts
Fuel consumption
Time
Date
1st stage burner ON/OFF
2nd stage burner ON/OFF
Output 20 ON/OFF
Output 29 ON/OFF
Output 52 Open/Closed
DHW tank pump ON/OFF
DHW pump ON/OFF
Heating circuit pump ON/OFF
Mixing valve Open/Closed
Different languages
Only displayed when LON
communication module is installed.
If holiday program has been
entered.
When the holiday program is
activated.
Only displayed if flue gas
temperature sensor is connected.
Only displayed if sensor is
connected.
Only displayed if DHW tank
temperature sensor is connected.
Only displayed if two DHW tank
temperature sensors are connected.
Only displayed in conjunction with
mixing valve circuits.
Reset hours runs, number of
burner starts and fuel consumption
after carrying out maintenance.
By pressing
D
,
the values can be
individually reset to zero.
Only displayed if selected via
coding addresses ”26” or ”29”.
Position stated in %.
Position stated in %.
Press
to select the respective
language as the permanent
language for all displays.
5285
941
-
0
1
Outdoor temperature
12
