Scanning service information
73
Temperatures, boiler coding cards and scans
1.
Press
9
and
rw
simultaneously
for approx. 2 seconds.
Access diagnosis level.
2.
Select the required data for scanning
with the
or
button.
3.
Press
.
Exit diagnosis level.
The following values can be scanned
depending on the system equipment
installed:
Damped outdoor temp.
Current outdoor temp.
Output reduction %
Desired boiler temp.
Current boiler temp.
Sensor 17A, current value
Sensor 17B, current value
Max. flue gas temp.
Current flue gas temp.
Desired DHW temp.
Current DHW temp.
Current DHW temp. 1
Current DHW temp. 2
Desired supply temp.
Current supply temp.
Desired room temp.
Current room temp.
Boiler coding card
Scan 1
Scan 2
Scan 3
Scan 4
Scan 5
Scan 6
Scan 7
The damped outdoor temperature
can be reset to the current
outdoor temperature by pressing
D
.
Only displayed if sensor
connected.
Only displayed if sensor
connected.
Only displayed if flue gas
temperature sensor connected.
The max. flue gas temperature
can be reset to the current value
by pressing
D
.
Only displayed if DHW tank
temperature sensor connected.
Only displayed if two DHW tank
temperature sensors are connected.
Only displayed if supply
temperature sensor connected.
Only displayed if remote control
connected.
See overview of boiler coding
cards on page 94.
See page 74 for scans 1 to 7.
Only in conjunction with LON
communication module
Only in conjunction with LON
communication module
5285
941
-
0
1
Outdoor temp. damped
-5
