SD500 Spindle Servo Drive Manual
5
Spindle
function
Speed control
Range: 0~12000RPM;
Directional control
±1 pulse accuracy; set 8 positions with terminals
Rigid tapping
Connectable to a variety of imported and domestic systems with 2%
tapping error
Encoder self-learning
Dual encoders automatically learn directions without wiring adjustments
One-touch zero setting
One touch to set any position as zero point
Arbitrary crossover output
1 to 32767 arbitrary crossover output selection
Others
C-axis control, thread cutting, electronic gear, borehole, zero- speed lock
Protection
Protection against overvoltage, undervoltage, current limit, overcurrent,
overload, overheat, overvoltage stall, input and output phase loss, and
stall, data protection, electronic thermal relay
Environment
Installation site
Altitude below 1,000 metres, if use above 1,000 metres requires a
derating of 1% for every 100 metres of elevation;
No condensation, icing, rain, snow, hail, etc., solar radiation below
700W/m2, air pressure 70 to 106kPa
Temperature & humidity
-10~
+50 ℃,
if
derate above 40 ℃, max. of 60 ℃ (no
-load running)
5%~95%RH (no condensation)
Vibration
When 9~200Hz
，
5.9m/s2(0.6g)
Storage temperature
-30~
+60℃
Installation method
Wall-mounted, vertical -mounted
Protection level
IP20
Cooling method
Forced air cooling
Table 1-3
