SD500 Spindle Servo Drive Manual
99
or devices
● Whether there is any obvious ch
ange on the appearance.
● Replace damaged parts.
Electrolytic
capacitor
● Whether liquid leakage, discoloration, cracking, safety valve exposure,
expansion, rupture or leakage.
● Replace damaged parts.
Surroundings
●
External equipment appearance and insulation inspection.
● Clean the environment and replace
damaged parts.
Printed
circuit board
● Whether there is odor, discoloration, serious rust, and whether the connectors
are correct and reliable.
● Fasten connectio
ns;
● Clean the printed circuit board;
● Replace damaged printed circuit boards;
Cooling
system
● Whether the cooling fan is broken or blocked;
● Whether the heat sink is contaminated with garbage and dusty or dirty;
● Whether the air inlet and exhaust
port are blocked or contaminated with
foreign matter.
● Clean the working environment;
● Replace damaged parts.
Keyboard
● Whether the keyboard is broken and the display is defective.
● Replace damaged parts.
Motor
● Whether the motor has abnormal
vibration and abnormal rattling sound.
● Fasten mechanical and electrical
connections and lubricate the motor shaft.
Table 6-2
Note:
Do not carry out the relevant work while the power is on, otherwise there is a risk of death by electric shock. So, when carrying out the
relevant work, please cut off the power and make sure that the DC voltage of the main circuit has dropped to a safe level, and wait for 5 minutes
before any movements.
6.2 Maintenance
All equipment and components have a service life. Proper maintenance may extend the life, but not solve the damaged equipment and
devices, please replace the devices according to the requirements.
Part name
Life cycle
Part name
Life cycle
Part name
Life cycle
Fan
2~3 years
Electrolytic capacitor
4~5 years
Printed circuit board
8~10 years
Table 6-3
6.3 Product Warranty
1. If the product fails during the warranty period, please refer to the warranty terms on the warranty card for details about the scope.
2. In general, the primary fault diagnosis will be carried out by customers, but the service can be provided by Veichi or Veichi's service
network for a fee at your request. If the cause of the failure is on the product itself, the service will be free of charge based on mutual discussion.
3. Exemption from liability. Any inconvenience caused to customers or or secondary customers by the failure of our products and any
damage caused to non-our products, whether within the warranty period, shall not fall within the scope of our responsibility.
