6.0 Setup
Test port/s and network settings are required prior to performing any measurements or applications.
6.1 Port setup
Port setup or the test interface configurations are accessed via the Setup menu located on the Home page. The user selects the
operation mode and the interface/s that will be used to carry out tests. The available selections will differ from MX100 to MX120 as
follows;
Mode Selection
- Ethernet or fibre channel (MX120 only)
Operation Modes
- Single or Dual Port (MX120 only)
Port Selections
- Differs from MX100 to MX120
MX100 Interface selections;
Single Copper port 10/100/1000 Base-T
Single Copper port 10/100 to 100 Base-FX
Single Fiber port 1000 Base-X
MX100 Port settings - Copper
MX100 Port settings - Fiber
MX100/120 e-Manual D07-00-004 Rev A04
Page 17 of 115
