Note: Multiple Streams
All streams are configured for the same test layer - if layer 2 is selected, then all streams will be layer 2
traffic.
Throughput - Header Summary Stream #1
Throughput - MAC Setup Stream #1
Note: Multiple Streams - MAC/IP address setups
- If all streams are going to the same far end unit, then the MAC/IP destination addresses must be the same
on all of the streams.
- If any of the traffic streams are going to more than one far end unit, please ensure that the correct MAC/IP
destination addresses are configured for the respective streams.
7.3.1.4 Traffic Settings (Individual Stream Configuration)
In the Traffic tab the user is be able to configure the traffic profile per stream, including frame size selection, traffic type, and
MX100/120 e-Manual D07-00-004 Rev A04
Page 57 of 115
