MX100 Introduction:
The MX100 is part of the MX product family and is configured for;
Single port operation
Single Copper port 10/100/1000Base-T
Single Fiber port 1000Base-X
Test Applications:
When the unit is operating in any of the physical ports above, each port is enabled to run the same
test application.
BERT
- Unframed / Framed Layer 1, and Framed Layer 2/3 Ethernet traffic generation with user selectable test
pattern for Bit Error Rate analysis.
RFC 2544
- Throughput, Back-to-Back, Frame Loss and Latency conformance tests in accordance with RFC 2544
specifications.
Throughput
- Ethernet traffic generation and analysis with multiple-streams to verify network throughput and jitter
Loopback
- Loop back the transmitted data while swapping the source and destination addresses of the MAC, IP
and UDP layers.
MX100 - End-to-End Performance Test Application
MX100/120 e-Manual D07-00-004 Rev A04
Page 7 of 115
