To add additional test frames, tap the 'Add Frame' button.
Enter the frame size using the numeric keypad and click apply.
Press the back button to return to the frames screen.
The new custom frame size is displayed - it can be enabled or disabled as needed.
RFC2544 Setup - Frame Settings
RFC2544 Setup - Jumbo Frame
7.2.1.3 Threshold Settings
Threshold tab:
User enables or disables threshold settings for the throughput and latency tests.
When enabled, threshold settings can be configured for all of the test frames selected in the frame settings tab.
A Pass/Fail criteria will be applied when the threshold settings are enabled.
For example - If the throughput threshold value for a 64 byte frame is configured for 80%, then a Pass criteria is
assigned if the throughput rate is 80% or better
The threshold values for Throughput and Latency can be customized per user requirements. Tap on the selected
value to edit.
RFC2544 Setup - Thresholds
RFC2544 Threshold Editing
MX100/120 e-Manual D07-00-004 Rev A04
Page 44 of 115
