MX120 Test Interfaces
The MX120 is equipped with the following interfaces;
Electrical Ethernet Interfaces
Dual 10/100/1000Base-T Ports, RJ45 connector, IEEE 802.3 compliant
A green LED on the RJ45 connector flashes when there is activity on the network.
The green LED is On when there is a valid Ethernet link with the network and off when there is no link.
Optical Ethernet Interface options
Dual 1000Base-X SFP Ports, LC connector
1000Base-SX (850nm)
1000Base-LX (1300nm)
1000Base-ZX (1550nm)
Note:
The configuration parameters (header, bandwidth, etc) for each application (on each of the ports) are completely
independent from one another. The possible port/application configurations include:
Port 1 (RFC 2544) and Port 2 (RFC 2544) - Dual copper and dual fiber ports
Port 1 (BERT) and Port 2 (BERT) - Dual copper and dual fiber ports
Port 1 (Throughput) and Port 2 (Throughput) - Dual copper and dual fiber ports
Port 1 (Loopback) and Port 2 (any application) - 10GE and single port copper or fiber
Port 1 (any application) and Port 2 (Loopback) - 10GE and single port copper or fiber
Port 1 (Loopback) and Port 2 (Loopback) - 10GE and single port copper or fiber
MX120 Connector Panel
MX100/120 e-Manual D07-00-004 Rev A04
Page 12 of 115