MX100/120 Copper Port
Advertisement Selection
MX100/120 Copper Port
User Defined Selection
s
Speed
- Only available when auto-negotiation is off. Select from 10Mbps, 100Mbps, or 1000Mbps when the 10/100/1000T
port is selected. 1000Mbps/1Gbps is fixed when the 1000Bse-X port is selected.
Duplex
- Only available when auto-negotiation is off for the 10/100/1000T port. Select from half or full duplex modes.
Flow control
- On or Off. Once the operating mode and interfaces are selected, the user can independently configure the
auto-negotiation, speed, duplex, and flow control settings for each port (where applicable).
When flow control is enabled, the test set will respond to pause frames received by the link partner by adjusting the
transmit rate.
When flow control is disabled, the test set ignores all incoming pause frames from the link partner and continues
transmitting at the configured transmit rate
6.2 Port Status
MX100 Copper Port Status
Page #1
MX100 Copper Port Status
Page #2
MX100 Copper Port Status
Page #3
MX100/120 e-Manual D07-00-004 Rev A04
Page 19 of 115
