7-1
7
In-Tank Setup
The In-Tank Setup function allows you to enter information about your tanks and the products they contain. Also,
through this function you set up the monitoring, reporting, and alarm features for each tank.
You must enter data individually for each connected tank.
Selecting the In-Tank Setup Function
To select In-Tank Setup, press FUNCTION until you see the message:
Press STEP to continue.
Tank Configuration
If necessary, press STEP until you see the message:
Use the message shown above to tell the system which of the four probe positions on a module are connected to
probes.
HOW THE SYSTEM CONFIGURES IN-TANK PROBES
If in-tank probes are installed, the system recognizes the presence and module slot location(s) of Probe Interface
Module(s). It also establishes a module number based on slot location. For example, if modules are installed in
slots #3 and #4, the module in slot #3 automatically becomes module #1 and the module in slot #4 becomes
module #2.
As you specify which positions on a module are connected to probes, the system establishes a number for each
probe that corresponds to the probe’s position on the module. For example, if there is a probe connected to
positions 2 and 3 of module 1, the probe for position 2 becomes T2 and the probe for position 3 becomes T3.
To indicate that a probe position on the module is connected to a probe, choose the number corresponding to that
position. For example, if the position is 3, choose 3 for the position. To indicate that a position is not connected to
a probe, choose X for that position.
SPECIFYING IN-TANK PROBE POSITIONS
To specify whether position 1 is connected, press CHANGE until the correct choice appears (1 if the position is
connected, X if it is not). Press the Right Arrow key to move to position 2 and press CHANGE again until the
correct choice appears. Repeat these steps until you have correctly specified all four probe positions. When you
have entered a choice for all positions, press ENTER to confirm your entry. The system displays the following
message:
IN-TANK SETUP
PRESS <STEP> TO CONTINUE
TANK CONFIG - MODULE 1
SLOT #: X X X X
SLOT # - 1 2 3 4
PRESS <STEP> TO CONTINUE
