6-3
6
Communications Setup
Port Settings
The choices are 7 or 8. To accept 7, press STEP. To choose 8, press CHANGE and press ENTER. The system
confirms your choice with the message:
Press STEP to continue.
DIAL TYPE
Choose the Dial Type (Tone or Pulse) that matches the receiving device.
NOTE: The above message appears only for systems equipped with a modem module.
To accept Tone, press STEP. To choose Pulse, press CHANGE and press ENTER. The system displays the
message:
Press STEP to continue.
ANSWER ON
Use this display to set the number of rings on which the system answers an incoming communication. You may
enter 0 through 9 rings.
NOTE: The above message appears only for systems equipped with a modem module.
To accept the system default of 1 ring, press STEP. To choose another value you can toggle the CHANGE key (for
2 through 8 rings) or enter the desired value using the numeric keys. Press ENTER to confirm your entry. The
system displays:
Press STEP to continue.
SECURITY CODE
If desired, you can enter a 6-digit security code for this board. To accept no code press STEP to continue. To enter
a code press CHANGE.
Enter the 6-digit code (e.g., 000016) and press ENTER. The system confirms your choice with the message:
DATA LENGTH: X DATA
PRESS <STEP> TO CONTINUE
COMM BOARD: 1 (Type)
DIAL TYPE: TONE
DIAL TYPE: PULSE
PRESS <STEP> TO CONTINUE
COMM BOARD: 1 (Type)
ANSWER ON: 1
ANSWER ON: (Number)
PRESS <STEP> TO CONTINUE
COMM BOARD: 1 (Type)
CODE: DISABLED
COMM BOARD: 1 (Type)
CODE: 000016
