6
Communications Setup
Phone Directory Setup
6-8
number for the selected receiver, press CHANGE. Enter the number and press ENTER to confirm your entry. The
system displays:
Press STEP to continue.
SELECT MODEM
After you set the receiver phone number, the system displays the message:
Your system may have up to three a modem modules in slots 1, 2, and/or 3 of the Comm Bay. Enter the slot
number in which the a modem module that you are using as the modem for the specified telephone number is
installed. To accept the slot number shown, press STEP, or press CHANGE until the correct slot number appears,
then ENTER to confirm your choice. The system displays:
Press STEP to continue.
RECEIVER TYPE
After you select the modem module’s Comm Bay slot number, the system displays the message:
The system provides three choices for the type of receiver: Teletype, Facsimile, or Computer. A description of each
follows:
Teletype:
the system calls the receiver telephone number and then transmits the programmed RS-232 reports.
Facsimile:
the system calls the receiver telephone number then transmits the report in facsimile format.
Computer:
the system calls the receiver telephone number and then waits 1-minute for a command from the
computer (receiver).
To choose Teletype, press STEP. (The system displays the Retry Number message.) To choose Facsimile, press
CHANGE once. To choose Computer, press CHANGE twice. Press ENTER to confirm your choice:
Press STEP to continue.
RETRY NUMBER
After you select the receiver type, the system displays the message:
D1: (Phone #)
PRESS <STEP> TO CONTINUE
D1:
SELECT MODEM: 3
SELECT MODEM: [Selection]
PRESS <STEP> TO CONTINUE
D1:
RCVR TYPE: TELETYPE
RCVR TYPE: (Selected Setting)
PRESS <STEP> TO CONTINUE
D1:
RETRY NUMBER: XX
