6
Communications Setup
Auto-Dial Setup
6-10
Auto-Dial Setup
If necessary, press STEP until you see the message:
NOTE: This message appears only if you have a modem module installed and after you complete the Phone
Directory Setup.
Using Auto-Dial Setup, you can tell the system what reports to transmit, to whom to transmit, and when to transmit.
You can also specify the intervals at which the system transmits this information.
RECEIVER REPORT LIST
Press ENTER in response to the AUTO DIAL SETUP message. The system displays the message:
Use this display to choose the types of status reports that you want to transmit to all programmed telephone
numbers or to single telephone numbers. Press ENTER to display the message:
To exclude System Status reports from transmission to the receiver specified in the first line of the message (D1,
D2, etc.), press STEP. (The system displays the next type of report.) To include System Status reports for
transmission to the selected receiver, press CHANGE and press ENTER. The system confirms you choice with the
message:
Repeat the steps described in the previous paragraph for each type of report. The list of reports may include:
•
SYSTEM STATUS
• PERIODIC BOOK VAR
•
NONPRIORITY HISTORY
• IN-TANK STATUS
•
INVENTORY
• DELIVERY
•
LEAK DETECT
• SHIFT INVENTORY
•
PRESSURE LLD RESULT
• DAILY VAR ANALY
•
PERIODIC DLVY VAR
• PERIODIC ROW REPORT
•
FUEL MANAGEMENT
• CSLD REPORT
•
LAST DELIVERY
• LINE LEAK STATUS*
•
PRIORITY HISTORY*
• WPLLD LLD RESULT
* Volumetric Line Leak Detection
When you have specified the reports you want to transmit, press STEP to return to the RCVR REPORT LIST
message. If you want to transmit reports to additional receivers, press ENTER to redisplay the message:
AUTO DIAL SETUP
PRESS <ENTER>
D1: RCVR REPORT LIST
PRESS <ENTER>
D1: RECEIVER NAME
SYSTEM STATUS: NO
SYSTEM STATUS: YES
PRESS <STEP> TO CONTINUE
D1: RECEIVER NAME
SYSTEM STATUS: NO
