28
Archive Utility
Restoring Archived Setup Data
28-2
To save setup data, press CHANGE, then press ENTER. The system confirms your choice with the message:
The system asks you to reconfirm your choice with the following message:
To abandon the save process, press STEP. (The system displays the RESTORE SETUP DATA message.) To
continue saving setup data, press CHANGE, then press ENTER. The system displays the message:
When you press STEP in response to this message, the system starts saving your setup data to the EEPROM.
This process may take a minute or so. When the save is completed, the system returns the original message:
Press STEP to use another archive feature or press either FUNCTION or MODE to exit the Archive Utility.
Restoring Archived Setup Data
NOTE: If you are restoring after a reboot (switching the console Off and then back On), the system will wait 5
minutes before processing your request to restore archived setup data. This delay is to allow all hardware to
initialize.
If necessary, press STEP until you see the message:
If you do not wish to restore setup data, press STEP. (The system displays the CLEAR SETUP DATA menu.)
To restore setup data, press CHANGE, then press ENTER. The system confirms your choice with the message:
The system asks you to reconfirm your choice with the following message:
To abandon the restore process, press STEP. (The system displays the CLEAR SETUP DATA menu.) To continue
restoring setup data, press CHANGE, then press ENTER. The system displays the message:
SAVE SETUP DATA: YES
PRESS <STEP> TO CONTINUE
SAVE SETUP DATA: YES
ARE YOU SURE?: NO
ARE YOU SURE?: YES
PRESS <STEP> TO CONTINUE
ARCHIVE UTILITY
PRESS <STEP> TO CONTINUE
ARCHIVE UTILITY
RESTORE SETUP DATA: NO
RESTORE SETUP DATA: YES
PRESS <STEP> TO CONTINUE
RESTORE SETUP DATA: YES
ARE YOU SURE?: NO
ARE YOU SURE?: YES
PRESS <STEP> TO CONTINUE
