3-3
3
Setup Mode Organization
Setup Mode Programming Table
STEP
0.2 gph (0.76 lph) Line Test Auto-Confirm (Enable/Disable)
STEP
0.1 gph (0.38 lph) Line Test Auto-Confirm (Enable/Disable)
STEP
Daylight Savings Time (Disable/Enable)
STEP
HRM-QPLD Printouts (Enable/Disable)
STEP
Re-direct Local PrintouT (Enable/Disable)
STEP
Euro Protocol Prefix
STEP
Bdim Trans Alarm Delay
STEP
System Security Code
STEP
Maintenance History (Enable/Disable)
STEP
Tank Chart Security
STEP
Custom Alarms
STEP
Service Notice
STEP
Inventory Alarms Threshold Units (Standard, All % Full, All Volume, All Height, Custom)
STEP
System Beeper (Enable/Disable)
STEP
Mass/Density
STEP
Fiscal Height Security
STEP
Alarm Reduction (Enable/Disable)
FUNCTION
COMMUNICATION SETUP
STEP
Comm Board Port Settings - Repeat for each board (Baud Rate/Parity/Stop Bit/Data Length/
Dial Type/Answer On/Code/Modem Setup String/Dial Tone Interval/DTR Normal State
STEP
Auto Transmit Setup (Transmit Message Setup/Auto-Transmit Delay Time/Auto-Transmit Repeat
Time)
STEP
Phone Directory Setup
STEP
Auto Dial Setup
STEP
Auto Dial Alarm
STEP
RS-232 End Of Message
FUNCTION
IN-TANK SETUP
STEP
Tank Config Module 1 (Up To 3)
STEP
Product Label
STEP
Product Code
STEP
Thermal Coeff.
STEP
Tank Density
STEP
Tank Diameter
STEP
Tank Profile (1 Pt/4 Pts/20 Pts/linear/50 Pts)
STEP
Full Volume
STEP
Meter Data Present
STEP
Vapor Loss Factor
STEP
End Factor (None/Flat/Hemispherical/Other)
STEP
End Value
STEP
Calibration Update
STEP
Float Size
STEP
Water Minimum
STEP
Water Warning Limit (Not Active For Tanks With High Alcohol Probes)
STEP
High Water Limit (Not Active For Tanks With High Alcohol Probes)
STEP
Water Alarm Filter (Not Active For Tanks With High Alcohol Probes)
STEP
Max Or Label Volume
