Veeco MPS-3000 CE, Technical Manual

Page: 67 / 96

63
Command Name: SOURCE ON/OFF
Syntax: S[n]<cr>
Units: N/A
Range: n = 1 or 0
Description: Used to turn the source supplies on (S1) or off (S0).
Turn the source supplies on using the following command: S1<cr>
Command Name: SET AUTOMATIC DATA LOG TIME INTERVAL
Syntax: T[n]<CR>
Units: N/A
Range: n = 0 - 9
Description: Used to set the time interval at which the power supply will
transmit data when automatic data logging is enabled.
T0 - 2 Second Interval
T1 - 10 Second Interval
T2 - 20 Second Interval
T3 - 30 Second Interval
T4 - 1 Minute Interval
T5 - 2 Minute Interval
T6 - 5 Minute Interval
T7 - 10 Minute Interval
T8 - 30 Minute Interval
T9 - 1 Hour Interval
Set the auto data log time interval to 1 minute using the following com-
mand: T4<cr>
EXAMPLE 8.27 Turn
On the Source Supplies
EXAMPLE 8.28 Set-
ting the Auto Data
Log Time Interval