Veeco MPS-3000 CE, Technical Manual

Page: 52 / 96

48
Command Summary Table
Table 8.2: Command Summary Table
Command Description
A Attention
AB Set A/B Ratio
AC Enable/Disable Auto Cathode Mode
AD Enable/Disable Auto Data Logging
AE Enable/Disable Auto Error Logging
B Turn Beam Supplies On/Off
BE Set Beam Current Tolerance
BI Set Beam Current
BV Set Beam Voltage
CI Set Cathode Current
CL Set Cathode Limit
DI Set Discharge Current
DL Set Discharge Current Limit
DT Set Discharge Current Threshold
DV Set Discharge Voltage
M Set Power Supply Mode
NE Enable/Disable E/B Ratio Error
NI Set Neutralizer Current
NK Enable/Disable Front Panel
NL Set Neutralizer Limit
R Recall Memory
RC Request Running Conditions, Condensed Format
RH Manual Data Log Request, no Header
RN Request Target Parameters, Condensed Format
RP Request Target Parameters
RS Manual Data Log Request
RST Reset power supply
S Turn Source Supplies On/Off
T Set Auto Data Logging Interval
V Request Power Supply Version
VI Request Power Supply Version, Condensed Format