Veeco MPS-3000 CE, Technical Manual

Page: 63 / 96

59
Command Name: MANUAL DATA LOG REQUEST WITHOUT HEADER
Syntax: RH<c>
Units: N/A
Range: N/A
Response:
With the source and/or beam on:
<cr><lf>^^^^^^AA:BB:CC^^^DD.DD^^^E.EE^^^F
FF.F^^^
GGG^^^HHHH^^^IIII^^^JJJ^^^^^KKK^^LL.LL
<lf><cr><eot>
Where:
With the source and beam off:
<lf><cr>^^^^^^^^^^^^^^^^^SOURCE^&^BE
AM^ARE^OFF^DDDD
<lf><cr><eot>
Where:
DDDD - Fatal error message. If there is no fatal error message when the RH
command is received, DDDD = Blank Space (32).
^ = ASCII BLANK SPACE (32)
Description: Used to request data logging parameters without header infor-
mation. If a value is off, it will be replaced with ASCII blank spaces (32).
Parameter Model Units
AA.BB.CC
Time since source was
turned on
Hours/
Minutes/
Seconds
DD.DD
Cathode Filament Cur-
rent
HC Heater Current
MPS-3000 CE FC
MPS-3000 CE HC
Amps
Amps
E.EE Discharge Current All Amps
FFF.F Discharge Voltage All mA
GGG Beam Current All mA
HHHH Beam Voltage All Volts
IIII Accelerator Current All Volts
JJJ Accelerator Current All mA
KKK Emission Current All mA
ll.ll
Neut Filament Current
HCN Heater Current
PBN Filament Current
MPS-3000 CE FC
MPS-3000 CE HC
MPS-3000 CE PBN
Amps
Amps
Amps
^ ACSII Blank Space (32)