Unpacking
7
Removing the protective materials (Take-up System)
Take-up Unit
[1]
Remove the two screws (Pan-head screw with spring washer and flat
washer 4 × 8) from the fixed shaft mounting plate and remove it.
[2]
Remove one screw each (Pan-head screw with spring washer and flat
washer M4 × 8) from the tension unit weight fixing materials, and then
remove the two tension unit weight fixing materials.
[3]
Remove the two screws (Pan-head screw with spring washer and flat
washer M4 × 8) from the tension roller fixing material and remove it.
[4]
Unhook the auxiliary media setting plate from B and hook it to A.
[5]
Remove the two screws (Pan-head screw with spring washer and flat
washer 4 × 8) from the fixed shaft mounting plate on the opposite side
and remove it.
B
A
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...