ValueJet MUTOH VJ-1938TX, Startup Manual, Page: 11 / 56

Assembling 11
Follow the procedure below to assemble the stand.
Assemble the printer
Four or more persons are required to assemble this printer.
Procedure for assembling the stand
[1]
Assemble the right stand.
[2] Attach the right leg part to the right base part so that four screw holes
in the base part are at the front.
[3] Tighten two hexagon socket head cap screws using a hexagonal wrench (supplied accessory).
[4] Assemble the left stand in the same way as in Step 2, 3.
[5] Fasten the connector bar to the right stand using two hexagon socket
head cap screws.
• Attach the connector bar with the groove facing the rear as shown in the
illustration.
[6] Fasten the connector bar to the left stand in the same way as in Step 5.
CAUTION
Leg (right)
Base
Hexagon socket head cap
screws
Screw holes
Front
Screw holes
Front
Leg (left)
Base
Hexagon socket head cap
screws
Stand (right)
Connector bar
Hexagon socket
head cap screws
the groove surface
Front
Stand (left)
Connector bar
Hexagon socket
head cap screws
Front