44
Test printing
Using the printer operation panel
[6]
Close the front cover.
[1]
• “No Media Detected” is displayed on the operation panel.
• Press and hold the [Enter] key to 2 seconds or longer to execute media
initialization.
[2]
Make sure that the [Take-Up] lamp has lit up green.
Note
If the [Take-Up] lamp is not green, select “Take Up” in “Set 6 Output Mode”.
Operation manual “Set 6: Output Mode” P.80
[3]
Press the [Forward] key on the operation panel, and take up about 2
to 3 rounds of the media to the media tube of the Take-up Unit.
Note
When “Media End/Take-up Error” is displayed on the operation panel, the media setting lever will be raised and lowered and the media detection operation
will start.
Check the combination of the Operation switch and the AUTO switch of the front tension unit, and select the correct combination.
Operation manual “When “Media End/Take-up Error” is displayed on the operation panel” P.29
Press!
Check!
Press!
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...