40
Test printing
Using the tension take-up method to set the media
[1]
Lift the tension bar of the front tension unit manually to its highest
position.
[2]
Unhook the auxiliary media setting plate from A and hook it to B.
• Mount the tension bar to the auxiliary media setting plate.
[3]
Put the roll media from the bottom to the top over the front tension
unit’s tension bar.
[4]
Secure the roll media to the media tube using double-sided tape.
Note
• For instructions on how to roll back the media during the setting operation, refer to
the following page.
Operation manual “Rolling back the media during the media setting operation”
P.28
• After rolling back the media, adjust the position of the roller so that the edge of the
media on the roller is straight when seen from behind.
B
A
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...