Test printing
37
[8]
Loosen the screws with a handle on left and right sides, and then
adjust the position of the roll media.
• Make sure that the center of the roll media and the center of the media feed
slot are aligned.
• Once adjustment is complete, tighten and secure the screw with a handle.
Put the media through the rear roller assembly
[1]
Move the MANUAL switch on the rear tension unit to the NORMAL
side and pull the roll media out about 1.5 m.
[2]
Put the roll media over the rear roller (A).
• For the outside roll media, see the left illustration.
• For the inside roll media, see the left illustration.
[3]
Put the roll media from the bottom to the top over the rear tension
unit’s tension roller.
NORMAL
A
A
A
A
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...