46
Test printing
Important!
If the printer perform the nozzle check printing immediately after the initial ink charge is complete, the following results may
occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow “Menu 3: Cleaning” P.94 of the operation manual and perform “Little Charge”. Then, check the print result.
If there is no improvement in the print result even after performing “Little Charge”, leave the printer unused for an hour or more.
Then perform “Little Charge” again and check the print result.
If there is still no improvement, contact your local Mutoh dealer.
2.
Cleaning steps
[1]
Press the [Cleaning] key, so that the “Normal” indicator (one of the
“Cleaning Mode” indicators) lights steady.
• The cleaning mode will be set to “Normal”.
[2]
Press the [Cleaning] key for more than two seconds.
• Cleaning will start.
[3]
Conduct a nozzle check, again.
“Nozzle check steps” P.47
• If there is still nozzle clogging, repeat Normal cleaning.
• See “Head cleaning” P.109 of the operation manual regarding “Short”, “Long”, “LittleCharge” and “InitialCharge” cleaning.
Press!
Normal Cleaning
Press!
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...