12
Assembling
Follow the procedure below to attach the stand to the printer.
[7]
Attach the waste fluid tank holder to the right stand using four screws.
[8]
Shake the stand to make sure that each part is firmly attached.
Procedure for attaching the stand
[1]
Turn the four adjusters as shown below to prevent the stand from
moving.
[2]
Insert the two transfer stays into the right and left transfer brackets, lift
the printer with four or more persons and place it on the stand.
[3]
Remove the two transfer stays and fasten the printer to the stand
using eight butterfly screws.
• 1: Transfer stays
• 2: Stand
• 3: Butterfly screws
Stand (right)
Screws
Waste fluid tank holder
Stand
Adjusters
Adjusters
Stand
Transfer stay
Transfer stay
Transfer bracket
Transfer bracket
1
1
2
2
3
3
3
3
3
3
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...