Test printing
45
Run the nozzle check printing, and if there is nozzle clogging, carry out cleaning.
• 4-color setting
• 7-color setting
Nozzle check and cleaning
1.
Nozzle check steps
[1]
Load the media to be used for the nozzle check.
”Load the media” P.37
[2]
Press the [Menu] key.
[3]
• Press the [ - ] key several times, to bring up the display on the left.
• Press the [>] key.
[4]
• Press the [Enter] key.
• Nozzle check patterns will be printed.
[5]
Check the patterns.
• If there is nozzle clog, go to “Cleaning steps” P.48.
• If all lines are clearly printed, you can start printing.
Note
• Before connecting to a computer to print, configure the IP address, subnet mask and gateway.
Operation manual “Set 20: IP Address”, “Set 21: Subnet Mask”, “Set 22: Gateway” P.87
• For instructions on how to connect to a computer, refer to the operation manual.
Operation manual “Connecting to a Computer” P.21
Press!
Menu 2 :
Test Print >
Test 1 :
Nozzle Check
K
Y
Y
K
M
C
C
M
K
Y
Y
K
M
C
C
M
Print head 2
Print head 1
Gr
Bl
K
Y
C
Or
K
M
Gr
Bl
K
Y
C
Or
K
M
Print head 2
Print head 1
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...