Assembling
17
[3]
Attach two clamps (small).
Installing the Take-up System
1.
Install the rear roller assembly
[1]
Hold the rear roller assembly as shown in the illustration.
Important!
• Do not hold the rollers. Otherwise they may deform.
• Make sure you have at least two persons when holding the rear roller
assembly.
[2]
Hook the rear roller assembly to the back of the printer.
[3]
Temporarily fasten the rear roller assembly using seven screws (Pan-
head screw with spring washer and flat washer M4 × 8).
Important!
When temporarily fastening the rear roller assembly, press it toward the
printer.
[4]
Firmly tighten the seven screws that you have temporarily fastened.
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...