42
Test printing
Using the slack take-up method to set the media (Only outside roll media)
Important!
The “SLACK” setting on this product doesn’t support inside roll media.
When the AUTO switch of the take-up device is set to INSIDE ROLL, the operation won’t start even if the OPERATION switch is set to
“SLACK”.
[1]
Drop the roll media between the tension bar of the front tension unit
and the media tube.
[2]
Secure the roll media to the media tube using double-sided tape.
Note
• For instructions on how to roll back the media during the setting operation, refer to
the following page.
Operation manual ”Rolling back the media during the media setting operation”
P.28
• After rolling back the media, adjust the position of the roller so that the edge of the
media on the roller is straight when seen from behind.
The media should be loaded to the roller as shown in the illustration
when seen from the side.
Summary of Contents for MUTOH VJ-1938TX
Page 55: ......
Page 56: ...VJ1938TXE Q 04...