Vaisala IRIS, User Manual

Page: 267 / 394

Product-Specific Parameters
The standard product generation parameters shown in the following table are taken from
the product configuration and displayed in
Product-Specific Parameters .
Table 21 Standard Product Generation Parameters
Product Type Parameter 1 Parameter 2 Parameter 3
BASE ... dBZ Threshold Max Range
BEAM Azimuth Limits Elevation Limits ...
CAPPI Data Parameter Height Max Range
CATCH Hours ... Max Range
FCAST Speed & Direction Data Threshold Max Range
GAGE Minutes avg Rain/Disdro ...
IMAGE ... ... Max Range
MAX Layer Bottom Layer Top Max Range
NDOP List of Sites ... Max Range
PPI Data Parameter Elevation Max Range
RAIN1 Input Product Minutes avg Max Range
RAINN Hours ... Max Range
RAW Data Parameters All/One Max Range
RHI Data Parameter Azimuth Max Range
RTI Data Parameter Start Az and El Max Range
SHEAR R, A, or E flags Elevation Max Range
SLINE Elevation(s) ... Max Range
SRI Melting level Profile/Convection flags Max Range
TDWR CF Wind Speed CF Wind Dir CF Gust Speed
TOPS ... dBZ Threshold Max Range
TRACK Inputs Product Area Threshold Data Threshold
USER Data Parameter ... Max Range
VIL Min Height Max Height Max Range
VVP Min & Max Height Number of Steps Bin Quota
WARN Symbol & Area Number of Inputs Number of hits
WIND Min & Max Height ... Max Range
XSECT Data Parameter Ctr Point R, AZ Orientation Angle
Chapter 7 – Requesting Product Output
RESTRICTED 265