Basic Connections – EasyIP Decoder
Here is an example of a simple EasyIP deployment. In this setup, an EasyIP Decoder manages up to four
EasyIP cameras and provides hard-wired audio connections. A PoE+ switch provides power and network
connectivity to the EasyIP products. The EasyIP Decoder connects directly to a computer as a USB
conferencing device.
Vaddio recommends making all connections while the PoE+ switch is turned off.
If no PoE+ switch is used, a mid-span PoE+ power injector (sold separately) is required for each EasyIP
device.
Caution
Do not connect the PoE+ switch to the network without guidance from an on-site network specialist.
Note
EasyIP cameras require an EasyIP Decoder or EasyIP Mixer to decode the AV-over-IP signal and originate
a USB stream.
The EasyIP Decoder is compatible with EasyIP cameras only. It does not detect or pair with other types of
cameras.
15
Complete Manual for EasyIP Systems
