Installation
This section covers:
n
Tips for selecting camera locations
n
Cabling notes
n
Installing the camera mount and mounting the camera
n
System connection diagrams with cameras and audio peripherals
And a required safety note here:
Note
PoE type networks connected to this equipment are for intra-building use only and should not be connected
to lines that run outside of the building in which this product is located.
Cameras and network-connected audio peripherals must be paired to the host device after the installation
is complete.
Contact Vaddio Technical Support if you have questions or encounter any problems. Phone 800.572.2011 /
+1.763.971.4400, email
Don’t Void Your Warranty!
Caution
When handling cameras, always support the camera's body when lifting or moving it. Lifting the camera by
its head or mounting arm will damage it.
Caution
EasyIP products are for indoor use. Do not install these products outdoors or in a humid environment
without the appropriate protective enclosure.
Caution
Do not install or operate any EasyIP product if it has been dropped, damaged, or exposed to liquids. If any
of these things happen, return the product to Vaddio for safety and functional testing.
Before You Start
Work with the network administrator to plan your EasyIP deployment. A typical EasyIP system
includes network equipment.
Do these things before installing any Vaddio product:
n
Be sure you can identify all cables correctly.
n
Check Cat-5 cables for continuity.
n
Talk to the network administrator.
o
Inform the network administrator if you are installing the EasyIP system with a PoE+ switch. The
Luxul switch sold as part of the EasyIP ecosystem is configured for DHCP operation. The network
administrator may need to take steps to ensure a trouble-free installation.
o
If you will be responsible for configuring the devices that you install, ask what hostnames (if any)
you should assign to them.
11
Complete Manual for EasyIP Systems
