VADDIO 999-60210-000 Complete Manual Download Page 132

Page: 132 / 176

Audio Management Commands

The following commands are valid for the EasyIP Decoder and EasyIP Mixer:

audio mute

audio volume

The following commands are valid for the EasyIP Mixer only:

audio route

audio crosspoint-gain

Audio Channels Available on the EasyIP Decoder

The following channels can be specified when sending audio commands to the EasyIP Decoder.

master

Applies the command to all audio channels.

Inputs

easy_mic_1

easy_mic_2

Applies the command to the external microphone connected to the specified
EasyMic port.

usb_playback

Applies the command to the audio portion of the incoming (far-end) USB stream

Outputs

master

Applies the command to all audio channels.

line_out_1

Applies the command to the audio from the connected speaker.

usb_record

Applies the command to the outbound (near-end) audio portion of the USB
stream

125

Complete Manual for EasyIP Systems

Summary of Contents for 999-60210-000

















































































































































































Search results

Summary of Contents for 999-60210-000

Reviews:

Related manuals for 999-60210-000

Brands by name

Popular brands

VADDIO 999-60210-000, Complete Manual

Search results

Summary of Contents for 999-60210-000

Reviews:

Related manuals for 999-60210-000

Brands by name

Popular brands