video pip
E
ASY
IP M
IXER
Get or set the state of the PIP.
In a call, the PIP is near-end video (the selected input); the main image is far-end video.
Synopsis
video pip { get | on | off | toggle | layout }
Options
get
Returns the current state of the PIP.
on
Enables the PIP.
off
Disables the PIP.
toggle
Changes the state of the PIP.
layout
<layout>
uppper_right
lower_right
lower_left
upper_left
top_bottom
left_right
Specifies the screen lay-out. The PIP may be in
any corner of the screen, or the screen may be split
vertically or horizontally.
layout get
Returns the screen layout that is used when the
PIP is on.
Examples
video pip layout left_right
OK
>
Sets the video output to show side-by-side images of the video output and PIP.
video source
E
ASY
IP D
ECODER
, E
ASY
IP M
IXER
Gets or sets the device's video source.
Camera inputs for the EasyIP Decoder are inputs 1 through 4. Camera inputs for the EasyIP Mixerare
inputs 2 to 5, corresponding to camera inputs 1 through 4. Input 1 is reserved for HDMI in.
Synopsis
video source { get | set <input> }
Options
get
Returns the video input that is currently selected.
set
Sets the video input that is currently selected.
<input>
Specifies the video input.
Examples
>video source get
source:
input2
OK
>
Returns the video input that is currently selected, Input 2.
>video source set input1
OK
>
Sets Input 1 as the selected video source.
123
Complete Manual for EasyIP Systems
