camera zoom
Moves the camera in toward the subject or out away from the subject.
When sending the command to a host device, you must specify the camera input.
Synopsis (host
device)
camera
<input>
zoom { in [<speed>] | out [<speed>] | stop | get | set <position> }
Synopsis (camera) camera zoom { in [<speed>] | out [<speed>] | stop | get | set <position> }
Options
<input>
Specifies the camera to control.
EasyIP Decoder: 1 to 4.
EasyIP Mixer: 2 to 5.
in
Zooms the camera in.
out
Zooms the camera out.
<speed>
Optional: Integer 1 to 7; specifies the zoom speed.
stop
Stops the camera's zoom movement.
get
Returns the camera's zoom setting as a floating
point value.
set
Sets the camera's zoom level as a floating point
value.
<position>
Floating point value; specifies the zoom level.
Range is 1.00 to 10.00 for EasyIP 10, 1.00 to 20.00
for EasyIP 20.
Examples
>
camera zoom in
OK
>
(Sent to the camera) Zooms the camera in at the default speed.
>
camera zoom stop
OK
>
(Sent to the camera) Stops the zoom motion.
>
camera 2 zoom set 7
OK
>
(Sent to the host device) Zooms the specified camera to zoom level 7.
113
Complete Manual for EasyIP Systems
