Restoring Factory Default Settings
This returns the device to its original state. If you export the device's configuration before restoring factory
defaults, you will be able to restore the room label, time zone information, and home information by
importing the configuration afterward.
Note
Because restoring factory defaults returns the product to a "like new" condition, you will need to do the
initial device set-up again if you restore factory defaults.
From the web interface:
Log on using the admin account, go to the System page's Firmware tab, and
select Restore Factory Settings.
From the Vaddio Deployment Tool:
Locate the device, select it in the Name column to open its detail
page, and select Restore Factory Defaults from the Controls list.
This tool is available as a free download at
https://info.legrandav.com/VaddioDeploymentTool
From the device (EasyIP Decoder only):
Press and hold the IP address button while disconnecting and
then reconnecting the network/PoE+ cable.
153
Complete Manual for EasyIP Systems
