To pair Dante audio devices to the EasyIP Mixer:
1. From the main Network View, select Routing.
2. Use the matrix to pair receivers (speakers) and transmitters (microphones) to the EasyIP Mixer, which
is both a receiver and a transmitter.
In this screen shot, the receiver "Speaker" is routed to Dante output 1 of the device "ChrisE2x1". The
transmitter "Table" (a tabletop microphone) is routed to the device's Dante input 1.
To rename a device in the Dante Controller application:
In the Device View window, select the device and go to its Device Config tab. The Rename Device option
is near the top of the tab.
42
Complete Manual for EasyIP Systems
