Installing the Camera
1. Route the cable through the opening in the mounting shelf and connect it to the camera.
2. Place the camera on the mount.
Image for illustration only; not to scale. Camera and mount details may differ.
3. Attach the camera to the mount using the mounting screw supplied with the camera.
Note
EasyIP 10 camera only: If the camera is jostled or bumped while it is connected to power, it may require a
pan-tilt reset.
About Ceiling-Mounted Cameras
If you use an inverted mount, set the camera's Image Flip mode ON for inverted operation. This orients the
video image correctly and sets the tilt motors to respond appropriately to tilt up and down commands from
the remote, web interface, and connected control devices. This control is available to the administrator on
the web interface's System page. See
Inverting the Image for Ceiling-Mounted Cameras
19
Complete Manual for EasyIP Systems
