system reboot
Reboots the device either immediately or after the specified delay.
Synopsis
system reboot [<seconds>]
Options
<seconds>
The number of seconds to delay the reboot.
Examples
>
system reboot
OK
>
The system is going down for reboot NOW!p-decoder-D8-80-39-62-A7-C5
Reboots the device immediately.
>
system reboot 30
Reboots the system in 30 seconds. The response is in the same form; the system
message appears at the end of the delay.
system factory-reset
Gets or sets the factory reset status. When the factory reset status is on, the device resets to factory
defaults on reboot.
Note
Factory reset does not affect settings managed in the Dante Controller application.
Synopsis
system factory-reset { get | on | off}
Options
get
Returns the device's current factory reset status.
on
Enables factory reset on reboot and returns he
device's current factory reset status.
off
Disables factory reset on reboot and returns he
device's current factory reset status.
Examples
>
system factory-reset get
factory-reset (software):
off
factory-reset (hardware):
off
OK
>
Returns the factory reset status.
This evaluates the most recent
system factory-reset
on or off command, if
one has been received.
>
system factory-reset on
factory-reset (software):
on
factory-reset (hardware):
off
OK
>
Enables factory reset upon reboot.
Note
This command does not initiate a factory reset. The factory reset takes place on the
next reboot.
134
Complete Manual for EasyIP Systems
