camera ccu set
Sets the specified CCU (lighting) information.
When sending the command to a host device, you must specify the camera input.
Synopsis (host
device)
camera
<input>
ccu set <param> <value>
Synopsis (camera) camera ccu set <param> <value>
Options
<input>
Specifies the camera to control.
EasyIP Decoder: 1 to 4.
EasyIP Mixer: 2 to 5.
auto_iris
{on | off}
Sets auto-iris on or off. Auto-iris disables manual
iris and gain when it is on.
auto_white_balance
{on |
off}
Sets auto white balance on or off. Auto white
balance overrides red gain and blue gain manual
settings.
backlight_compensation
{on | off}
Sets backlight compensation on or off. Can only be
used when wide dynamic range is off.
blue_gain
<0..255>
Sets blue gain (integer 0 to 255). Can only be used
when auto white balance is off.
chroma
<0..14>
Sets chroma (integer 0 to 14).
detail
<0..15>
Sets detail (integer 0 to 15).
gain
<1..11>
Sets gain (integer 1 to 11). Can only be used when
auto-iris is off.
gamma
<-16..64>
Sets gamma (integer -16 to 64)
iris
<0..11>
Sets iris (integer 0 to 11). Can only be used when
auto-iris is off.
red_gain
<0..255>
Sets red gain (integer 0 to 255). Can only be used
when auto white balance is off.
wide_dynamic_range
{on |
off}
Sets Wide Dynamic Range on or off. Can only be
used when backlight compensation is off.
Examples
>
camera ccu set auto_iris off
OK
>
(Sent to the camera) Turns off auto-iris, returning the camera to manual iris control.
>
camera 2 ccu set red_gain 10
OK
>
(Sent to the host device) Sets red gain to 10 for the specified camera.
117
Complete Manual for EasyIP Systems
