Vacon 20 CP, Installation, Technical And Maintenance Manual

Page: 94 / 112

8
vacon • 91 Options
8.6 Option boards
VACON
®
20 CP drive family embodies a wide selection of expander boards with which the available
I/O resources of VACON
®
20 CP frequency converter can be increased and its versatility improved.
There is one board slot (labelled D) on the VACON
®
20 CP control unit. To locate the slot, see Chap-
ter 5. Usually, when the AC drive is delivered from the factory, the control unit doesn’t include any
option board in the board slot.
The following option boards are supported:
See the Option boards User’s Manual to use and install the option boards.
Order Code Description Note
OPT-B1-V
Option board with six bidirec-
tional terminals.
With jumper blocks it’s possible to
use each terminal as digital input or
as digital output.
OPT-B2-V
I/O expander board with a
thermistor input and two relay
outputs.
OPT-B4-V
I/O expander board with one
galvanically isolated analogue
input and two
galvanically isolated analogue
outputs (standard signals
0(4)…20mA).
OPT-B5-V
I/O expander board with three
relay outputs
OPT-B9-V
I/O expander board with five
42…240 VAC digital inputs and
one relay output.
OPT-BF-V
I/O expander board with ana-
logue output, digital output and
relay output.
On the OPTBF board, there is one
jumper block for selecting the ana-
logue output mode (mA/V).
OPT-BH-V
Temperature measurement
board with three individual
channels.
Supported sensors: PT100, PT1000,
NI1000, KTY84-130, KTY84-150,
KTY84-131
OPT-BK-V ASi option board AS-interface option card
OPT-C4-V Lonworks option board
Pluggable connector with screw ter-
minals
OPT-C3/E3-V Profibus DP option board
Pluggable connector with screw ter-
minals
OPT-C5/E5-V Profibus DP option board 9-pin Sub-D terminal
OPT-C6/E6-V CANopen option board
OPT-C7/E7-V DeviceNet option board
OPT-CI-V Modbus TCP option board
OPT-CP-V Profinet option board
OPT-CQ-V Ethernet IP option board
OPT-EC-V EtherCat option board
Table 40. Option boards supported in
VACON
®
20 CP.