manualshive.com logo in svg

Utax cd 1116, Service Manual

Share
Download
Utax cd 1116 Service Manual Download Page 110

Maintenance

Description

item No.

2DA/2DB

1-4-42

U341

Specific paper feed location setting for printing function

Description

Sets a paper feed location specified for printer output.

Purpose

To use a paper feed location only for printer output.

Method

1. Press the start key. The screen for selecting an item is displayed.
2. Select the paper feed location for the printer using the up/down cursor keys. The selected item is displayed

in reverse.

Display

Description

PF1

Drawer

PF2

First paper feeder*

2

PF3

Second paper feeder*

1

PF4

Third paper feeder*

1

*1: Optional.  *2: Optional for 16 ppm model. Standard for 20 ppm model.

3. Change the setting using the left/right cursor keys.

0: OFF   1: ON

4. Press the start key. The setting is set.

Completion

Press the stop/clear key. The screen for selecting a maintenance item is displayed.

U342

Setting the ejection restriction

Description

Sets or cancels the restriction on the number of sheets to be ejected continuously.
When the restriction is set, the number of sheets that can be ejected continuously to the internal eject tray will
be limited to 250.

Purpose

According to user request, sets or cancels restriction on the number of sheets.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select either ON or OFF using the up/down cursor keys. The selected item is displayed in reverse.

Display

Description

ON

Sets restriction on the number of sheets

OFF

Cancels restriction on the number of sheets

Initial setting: ON

2. Press the start key. The setting is set.

Completion

Press the stop/clear key. The screen for selectiong a maintenance item No. is displayed.

Summary of Contents for cd 1116























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands