manualshive.com logo in svg

Utax cd 1116, Service Manual

Share
Download
Utax cd 1116 Service Manual Download Page 105

2DA/2DB

1-4-37

Maintenance

Description

item No.

U251

Checking/clearing the maintenance count

Description

Displays, clears and changes the maintenance count.

Purpose

To check the maintenance count. Also to clear the count during maintenance service.

Method

Press the start key. The maintenance count is displayed.

Clearing

1. Select the CLEAR using the up/down cursor keys.
2. Press the start key. The count is cleared, and the screen for selecting a maintenance item No. is displayed.

Setting

1. Select the COUNT using the up/down cursor keys.
2. Enter a seven-digit count using the numeric keys.
3. Press the start key. The count is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the count, press the stop/clear key. The screen for selecting a
maintenance item No. is displayed.

U252

Setting the destination

Description

Switches the operations and screens of the machine according to the destination.

Purpose

To be executed after replacing the backup RAM on the main PCB or initializing the backup RAM by running
maintenance item U020, in order to return the setting to the value before replacement or initialization.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select the destination using the up/down cursor keys. The selected item is displayed in reverse.

Display

Description

JAPAN METRIC

Metric (Japan) specifications

INCH

Inch (North America) specifications

EUROPE METRIC

Metric (Europe) specifications

ASIA PACIFIC

Metric (Asia Pacific) specifications

2. Press the start key. The setting is set, and the machine automatically returns to the same status as when

the power is turned on.

Completion

To  exit this maintenance item without changing the current count, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.

Supplement

The specified initial settings are provided according to the destinations in the maintenance items below. To
change the initial settings in those items, be sure to run maintenance item U021 after changing the destination.
• Initial setting according to the destinations

Maintenance

Title

Japan Inch

Europe Metric,

item No.

Asia Pacific

253

Switching between double and single counts

Single

Double

Double

Summary of Contents for cd 1116























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands