Chapter 13: Alarm and event setup
TruVision DVR 45HD User Manual
99
6. Click
Copy
to copy these settings to other cameras, if required, and then click
Apply
to save the changes.
7. Click
Exit
to return to live view.
Manual trigger
The manual trigger menu allows you to manually trigger outputs of the recorder.
To trigger or clear alarm outputs manually:
1. From the menu toolbar, click
Alarm & Event Setup
>
Manual Trigger
.
2. Select the desired alarm output and click the following buttons:
Trigger / Trigger All
: Trigger an alarm output or stop an alarm output. As there is
only one alarm output available, the “Trigger All” button just triggers the one output.
However, if an IP camera is connected to the recorder, then the outputs of the
camera will also be listed.
Clear All
: Stop all alarm outputs at once.
3. Click
Exit
to return to live view. The alarm is silenced.
- Or -
Press the
Alarm
button on the front panel or remote control. The alarm is silenced.
Buzzer settings
When an alarm is triggered by the system or a camera, the recorder can be set up to
respond with a warning buzzer. You can modify the time during which the warning
buzzer sounds for both system and camera alarm. Select
Alarm & Event Setup >
Buzzer Settings
and select a buzzer time limit for the system and camera alarms.
Select Mute, 5 s, 10 s, 20 s, 30 s, 60 s, 120 s, 240 s, or Constant. Default is Constant.
Alarm and event notification
You can select the alarm and event notifications to be included in the event hint icon of
the alarm center displayed in live view. Clicking the icon opens the window of the alarm
center that lists the detected alarm and event notifications. See “Status information” on
page 25 for information on the status icon displayed in the OSD.
You can quickly check the system status by looking at the status LEDs on the front
panel.
The different types of alarm and event notifications are:
• HDD Full:
All installed HDDs are full and will not record any more video.
