Chapter 4: Operating instructions
TruVision DVR 45HD User Manual
21
Item
Description
11. Zoom + and -
Use to control zoom of camera lens.
12. Preset
Enter preprogrammed three-digit code to call up a preset.
13. Tour
Enter preprogrammed three-digit code to call up shadow tour.
14. Focus + and -
Use to control focus of camera lens.
15. Playback control
Use to control playback (Rewind, Pause, Play, and Fast Forward).
16. Search
Open the Search menu.
17. Replay
Play back the selected file from the beginning.
18. Eject
Eject the CD or DVD disk.
19. Archive
Press once to enter quick archive mode. Press twice to start archiving.
Aim the remote control at the IR receiver located at the front of the unit to test
operation.
To change the address of the remote control to the recorder:
1. Press the
Menu
button on the front panel or right-click the mouse and select the
Menu
button. The default display menu window appears.
2. Click
Device Management
>
General Settings
.
3. Check the remote control ID value. The default value is 255. This device address is
valid for all IR controls.
Note
: The recorder will respond to any remote control that has an address between
1 and 255.
4. On the remote control press the
Device
button.
5. Enter the device address value. It must be the same as that on the recorder.
6. Press the
OK
button on the remote control.
To place batteries into the IR remote control:
1. Remove the battery cover.
2.
Insert the batteries. Make sure that the positive (+) and negative (−) poles are
correctly placed.
3. Replace the battery cover.
Troubleshooting the remote control
If the IR remote control is not functioning properly, perform the following tests:
• Check the battery polarity.
• Check the remaining charge in the batteries.
• Check that the IR remote control sensor is not masked.
If the problem still exists, please contact your administrator.
