Chapter 4: Operating instructions
20
TruVision DVR 45HD User Manual
The IR remote control can be programmed with a unique device ID address so that the
controller will only be able to communicate with recorders with that address. No
programming is necessary if using a single recorder.
The device ID address only applies when using a remote control and not when using a
keypad.
You can purchase a replacement remote control by ordering part number TVR-
REMOTE-1.
Figure 5: IR remote control
Item
Description
1. Alarm
Acknowledge an alarm.
2. Device
Enable/disable the IR remote control to control the recorder.
3. Numeric buttons
Select a camera, and enter a number in a menu option.
4. Display
Switch between the different multiview formats.
5. Mon A and Mon B Switch between monitors A and B.
6. Live
Return to live view mode.
7. Menu
Activate the main menu.
8. Seq
Start /stop sequencing.
9.
,
,
,
In Menu mode: Use left or right arrow buttons to select and up or down
arrow buttons to edit entry.
In PTZ mode: Use to control PTZ.
In Playback mode: Use to control playback speed.
10. OK
Confirm selection.
