United Technologies Interlogix TruVision DVR 45HD User Manual Download

Page: 126 / 172

Chapter 15: Storage management

124

TruVision DVR 45HD User Manual

Note:

You can create a RAID array of RAID 0, RAID 1, RAID 5, and RAID 10.

• If you choose RAID 0, at least 2 HDDs must be installed.

• If you choose RAID 1, 2 HDDs need to be configured for RAID 1.

• If you choose RAID 5, at least 3 HDDs must be installed.

• If you choose RAID 10, 4/6/8 HDDs need to be configured for RAID 10.

To verify the RAID:

1. Click

Storage Management

HDD Information.

To rebuild a damaged RAID:

If a drive in the RAID array fails, you can rebuild the array.

1. From the menu toolbar, click

Storage Management

RAID

2. Click the

Rebuild

icon

to open the

Rebuild Array

window.

3. Click

to start the rebuilding process

4. When complete the system will reboot.

Summary of Contents for Interlogix TruVision DVR 45HD













































































































































































Search results

Summary of Contents for Interlogix TruVision DVR 45HD

Reviews:

Related manuals for Interlogix TruVision DVR 45HD

Brands by name

Popular brands

United Technologies Interlogix TruVision DVR 45HD, User Manual

Search results

Summary of Contents for Interlogix TruVision DVR 45HD

Reviews:

Related manuals for Interlogix TruVision DVR 45HD

Brands by name

Popular brands