Chapter 13: Alarm and event setup
TruVision DVR 45HD User Manual
103
To set up a remote alarm host:
1. From the menu toolbar, click
Alarm & Event Setup
>
Alarm Host Setup
.
2. Enter Alarm Host IP and Alarm Host Port values.
Alarm host IP represents the IP of the remote PC where the Network Video
Surveillance software installed. The alarm host port value must be the same as
software’s alarm monitor port. Up to three alarm hosts can be set. For each alarm
host, the default port is 5001, 5002, and 5003.
3. Click
Apply
to save the settings.
4. Click
Exit
to return to live view.
Intrusion integration alarm reporting
The recorder includes an alarm receiver software module for intrusion integration. This
permits SIA and XSIA events to be reported to the recorder from Interlogix intrusion
panels via IP and to be linked to recorder actions.
The following Interlogix panels are supported:
ATS Master (EMEA only)
Advisor Advanced (EMEA only)
NetworX panels
Up to three intrusion panels can be set up in the recorder. Each panel can report up to
32 intrusion zones (a zone is an intrusion panel input).
The panels must support the SIA or XSIA reporting protocol. They can report the
following alarm types to the recorder:
An arming event
A disarming event
An alarm event that has an “A” as a second character in the SIA/XSIA code. See
“Event playback” on page 43 for the list of SIA codes.
A heartbeat alarm
In the intrusion panel, set up the recorder as a normal monitoring station.
To set up an alarm panel in the recorder:
1. From the menu toolbar, click
Alarm & Event Setup
>
Intrusion Panel Setup
.
2. In the
Intrusion Panel Setup
window, enter the required settings.
