38
Enter the hold time and press
E/yes
to save.
0-255
ID Search
– This sets whether the scanner searches for all IDs in a trunking system (
On
), or
scans only programmed IDs (
Off
).
The default setting is
Off
. also ID Toggle ID Scan or Search, page 53.
On
or
Off
Edit Fleet Map (Motorola Type I/ll systems Only)
– This allows you to program a fleet map
for Motorola Type I Systems. You must program a system fleet map in order for the scanner to
properly track and display talk group IDs.
Block 0 Scroll to the size code (0-14) and press
E/yes
.
The next available block is prompted to select the next size code (0-14).
Repeat for each block as needed (0-7).
Note
: If you select size code 12, 13, or 14, these restrictions apply:
12 can only be assigned to Blocks 0, 2, 4 or 6.
13 can only be assigned to Blocks 0 and 4.
14 can only be assigned to Block 0.
Since these size codes require multiple blocks, you will be prompted for the next
available block. Example: If you assign Block 0 as 12, the scanner prompts you for block
2, the next block available, instead of block 1.
Priority ID Scan (no P25 One Freq)
– This allows you to use Priority Scan with IDs in the
System. The default setting is
Off
. See also Priority Scanning on page 49.
On
or
Off
Set Status Bit (Motorola Only)
– This sets how your scanner works with Status Bits (also called
S-bits), letting you control how the scanner interprets and displays Motorola talk group IDs. The
default setting is
Ignore
.
Yes.
The scanner treats all received IDs as unique IDs.
Ignore.
The scanner rounds all received IDs down to the next interval of 16.
Set End Code (Motorola Only)
– This sets how the scanner handles the transmission end code
sent by most Motorola Systems.
The default setting is
Analog
.
Analog.
The scanner recognizes only analog end transmission codes.
Digital.
The scanner recognizes both analog and digital end codes.
Ignore.
The scanner waits for the carrier to drop before leaving a channel.
Emergency Alert (Motorola/EDACS Only)
– This sets how your scanner alerts you to IDs that
have the emergency flag set. The default setting is
Off
.
Set Alert Tone
Alert 1-9 or Off.
Set Level
Level 1-15 or Auto (the master volume level).
Set Alert Light
Set Color
Off, Blue, Red, Magenta, Green, Cyan, Yellow, or White.
Set Pattern
Summary of Contents for UBCD436-PT
Page 10: ......
Page 105: ...95 ...
Page 106: ...96 ...
Page 108: ... 2015 Uniden Australia Pty Ltd Printed in Vietnam U01UB376AZA ...